It's the difference between listening to music and feeling it.
Compatible with Apollo Series stereos only, designed specifically for use with your Fusion® DSP-equipped marine stereo and Fusion speakers .
This powerful and efficient 6-channel amplifier makes the difference between hearing music and feeling it. With an impressive 150 watts RMS per channel (at 4 ohms), this amplifier can power up to six pairs of speakers or four pairs of speakers and a subwoofer. The Easy Tune feature automatically adjusts audio settings for the best sound quality without manual adjustments (requires setup via the Fusion-Link™ app on a compatible smartphone). Characteristics: Impressive power: 150 watts RMS per channel (at 4 ohms), capable of powering up to six pairs of speakers or four pairs of speakers and a subwoofer. Efficient Class D design: Uses less power, so you can listen to music longer at higher volumes, with less battery drain. Easy Tune feature: Automatically adjusts audio settings for the best possible sound quality without the need for manual adjustments (requires setup via the Fusion-Link app on a compatible smartphone). LED indicator: Shows problems with electrical currents and short circuits, as well as temperature. Lower Total Harmonic Distortion: The amplifier is designed with minimal distortion and noise, allowing for better audio quality. Ignition Protection : Intelligent electronic fuse prevents damage from over/under current, temperature, output short circuit and other faults. Conformal Coated PCB: The amplifier circuit board has been specially coated to provide advanced protection from the marine elements. Powder coated aluminum finish: salt spray, temperature, vibration and UV tested with a modern aesthetic design to add style to your boat. Easy Installation: Proprietary cable connectors and a mounting bracket are included in the package. The cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allows you to simply snap the amplifier into place for a clean finish. High Power Mode: High Power Mode adapters are included in the package, designed to simplify the way you connect two channels in High Power Mode, increasing the output power. True-Marine™ Design: Designed to withstand the harshest marine environments season after season and comes with a 3-year warranty.
TECHNICAL SPECIFICATIONS
Physical dimensions without bracket (WxHxD) 11.69 x 7.06 x 1.75 inches (297 x 180 x 45 mm)
Physical dimensions with bracket (WxHxD) 11.69 x 7.06 x 2.13 inches (297 x 180 x 50 mm)
Weight 5.95 lbs (2.7 kg)
Water Rating IPX2 Amplifier Class Class-D CEA-2006 Power Rating 150 watts RMS x 6 @ 14.4V input - 4 ohms < 1% THD
Total Rated Output Power - 2 ohms (watts) 290 watts RMS x 6 @ 14.4V input - 2 ohms < 1% THD
Total Rated Output Power - 4 ohms bridged (watts) 580 watts RMS x 3 @ 14.4V input - 4 ohms bridged < 1% THD
Peak Power (Watts) 1800 Watts Input Sensitivity 1.3V rms Input Impedance 22k ohms Operating Voltage 10.8V - 16V DC
Current consumption (StandBy) < 5 mA @ 14.4 V input
Current consumption (idle) < 1.32 A @ 14.4 V input
Current consumption (maximum) 78 A
Fuse 125A electronic fuse (no replacement necessary)
Ignition Protection (SAE J1171)
Protection circuits Reverse voltage, input under/overvoltage, overtemperature, output short circuit
Operating Temperature Range 32° to 122° F (0° to 50° C)
DL'amplificatore è 12v? Gli altri che ho visto sono tutti 24v
R 05-01-25 Buonasera, confermo alimentazione a 12volt, le faccio presente al contrario di quanto mi ha indicato, che tutti gli Ampli sono a 12 Volt, l'unico a 24v è il seguente: https://www.painestore.it/fusion_amplificatore_sg-24da61500_6_canali_classe_d Cordiali saluti. Luigi Bianchi