Garmin Panoptix ™ PS70
The Panoptix PS70 is ideal for serious anglers. This 800-watt transducer is powered by the Garmin RapidReturn sonar module, which provides real-time imagery up to 1,000 feet below the surface. As the fastest real-time transducer at 1,000 feet, images refresh at least 10 times per second. Additionally, the PS70 through-hull transducer lets you quickly locate bait and fish with a 120-degree by 8-degree beam. Four modes can be viewed by a compatible GPSMAP® chartplotter.
The PS70 supports LiveVü down, traditional transducer, traditional triple-beam transducer, and RealVü 3D scanning technology. These capabilities allow the user to choose the best view for any situation. The new QuickDraw Contours features allow the user to survey and record large areas of the seafloor at depths up to 1,000 feet.
MAIN FEATURES:
REALVÜ 3D 
REALVÜ 3D scanning technology helps to locate
the fish and create a map of the ocean floor while
your vessel is moving.
Show the entire water column you've crossed
in 3D, from the bottom to the surface and all the fish present.
GARMIN RAPID RETURN
The Panoptix PS70 provides a minimum of 10 frames per
second (6-8 times faster than the competition), which translates to
in faster image updates.
3-WAY TRANSDUCER
A traditional 3-way transducer technology
which provides returns from the port and starboard directions,
as well as from targets directly under the boat, in a
intuitive visualization.
UP TO 1,000 FEET
A power of 800 watts offers the possibility of reaching
greater depths.
LIVEVÜ DOWN
View real-time images up to 1,000 feet.
The wide 120-degree beam angle covers large areas of water.
WIDE RANGE
Quickly find bait and fish with a technology
multibeam with a wide beam of 120 degrees by 8 degrees,
covering a larger portion of the column
of water at the same time.
QUICKDRAW CONTOURS
Quickdraw Contours allows users to survey large sections of the ocean floor, even at depths up to 1,000 feet. TRUE MOTION 3D - True Motion now enables RealVu 3D mode to follow the vessel's course on the COG.
TRADITIONAL
Use the Panoptix PS70 as a traditional transducer to view fish and track the bottom.
IMAGE STABILIZATION
An internal AHRS sensor will stabilize transducer returns, allowing you to have a clear view even in rough water.
THRU-HULL
The stainless steel thru-hull transducer can be flush mounted, pocket mounted, or installed using a fairing block. The fairing block can support boats with a deadrise angle of up to 20 degrees.
