Scanstrut SC110-111-112 Arms for Radar mounts
Install navigation lights or a GPS sensor or VHF antenna above the antenna for maximum visibility and performance.
• All mounting holes pre-drilled for easy retrofitting, connect by mounting bolts, no additional fastening required
• The cables pass internally through a watertight seal
• Options for mounting the port or starboard side of the radar antenna
• 316 marine grade stainless steel
SC110 Prepared to fit Perko lights series 0455/0466, Aqua Signal 25 and 40.
SC111 and 112 prepared for the installation of GPS or VHF antennas with standard right or left side thread
Compatible only as part of a radome installation.
ORDER INFORMATION Please note the following when ordering:
• SC110 - Installation on the left side of the Radar antenna
• SC111 - Installation on the right side of the Radar antenna
• SC112 - Installation on the left side of the Radar antenna Designed for installation of GPS antenna and "Whip" type VHF, HF / SSB, AM / FM and cellular antenna up to 1m high - must have standard 1 "x 14TPI thread as fastening.
They are also designed to work with the Pacific Aerials P6161 / P6162 adapter for their Pro range of antennas.
An extension mount is required to raise the GPS / VHF antenna higher or for installation with a 30 cm satcom antenna.
